链接：https://pan.baidu.com/s/1zUnZiIvSXUVRfHl16kQGQw 

提取码：26ek 

 

一、环境介绍

此次安装的oracle为11.2.0.3，Redhat环境为6.8

二、前期准备

1．上传6.8安装oracle的缺失包，一级安装需要的软件和脚本

 

2．安装Redhat6.8缺失的pdk包：rpm -ivh pdksh-5.2.14-30.x86_64.rpm --nodeps

 

3．执行安装前脚本

4．修改udev的裸设备路径vi /etc/udev/rules.d/60-raw.rules

ACTION=="add", KERNEL=="sdb1", RUN+="/bin/raw /dev/raw/raw1 %N"

ACTION=="add", KERNEL=="sdb2", RUN+="/bin/raw /dev/raw/raw2 %N"

ACTION=="add", KERNEL=="sdb3", RUN+="/bin/raw /dev/raw/raw3 %N"

ACTION=="add", KERNEL=="sdc1", RUN+="/bin/raw /dev/raw/raw4 %N"

ACTION=="add", KERNEL=="sdc2", RUN+="/bin/raw /dev/raw/raw5 %N"

ACTION=="add", KERNEL=="sdc3", RUN+="/bin/raw /dev/raw/raw6 %N"

ACTION=="add", KERNEL=="sdd1", RUN+="/bin/raw /dev/raw/raw7 %N"

ACTION=="add", KERNEL=="sdd2", RUN+="/bin/raw /dev/raw/raw8 %N"

ACTION=="add", KERNEL=="sdd3", RUN+="/bin/raw /dev/raw/raw9 %N"

KERNEL=="raw[1-9]",OWNER="grid",GROUP="asmadmin" MODE="660"

KERNEL=="raw1[0-2]",OWNER="grid",GROUP="asmadmin" MODE="660"

 

5．启动udev，让其配置生效

 

6．登录grid(oracle)用户配置两节点互信：ssh-keygen -t rsa/dsa

7．把自动生成的公钥传送到其他节点scp id_rsa.pub node2:/home/grid/.ssh/id_rsa.pub0 && scp id_dsa.pub node2:/home/grid/.ssh/id_dsa.pub0

 

8．在其他节点把所有的公钥cat到authorized_keys，然后把authorized_keys传到其他节点

 

9．使用ssh node date进行验证，是都需要密码，如果不需要，则表示互信成功了ssh rac0 date && ssh rac0priv date && ssh rac0.localdomain date && ssh rac0priv.localdomain date&& ssh rac2  date && ssh rac2priv date && ssh rac2.localdomain date && ssh rac2priv.localdomain date

 

三、DNS配置

1．修改/etc/named.conf,把里面的127.0.0.1和localhost改为any